Specs
Fixture Plate specs
Setup notes and key dimensions for Fixture Plate.
How Fixture Plate specs work in a real week
The Fixture Plate specs page covers the clamping, alignment, and setup references linked to the plate arrangement. It is written to help operators and fitters return the tooling to a known position without reworking the setup. That keeps repeat jobs closer to specification from the first piece.
Begin with the plate size, hole pattern, and datum references. Fixture Plate specs need the plate material, thickness, bush locations, and clamping reach recorded so the setup can be rebuilt after maintenance or a changeover. In Gauteng dust, at coastal plants, and during load-shedding stoppages, those details affect how accurately the job returns to zero.
Keep one overhead photo of the loaded plate and one close view of the datum corner. The spec sheet should sit with the tooling record and note torque values, stop positions, and any shims fitted under the workholding. That avoids guesswork when operators refit clamps after cleaning, repair work, or a short production stop.
Datum points, clamps, and offsets
Mounting dimensions, locating references, and checks for repeat alignment keep the team aligned. Plain wording matters when a fitter must set the plate back onto the machine bed without chasing old notes. A usable plate spec tells the next shift exactly what must touch, line up, and stay clear.
Match Fixture Plate specs to the related application note and the machine setup record before any plate drilling or rework starts. Check hole centres, fastener sizes, and clearance around the cutter path again before release. Through our contact form, give the current plate size and fixture arrangement.
- Plate thickness noted against clamp reach
- Datum corner marked for repeat loading
- Use contact form with plate size
Workshop conditions that shift plate accuracy
Fixture plates do not sit in ideal conditions for long. Dust builds under pads, coolant residue creeps into mounting points, and older machine tables may carry wear that pulls the plate out of plane. The spec should note where the plate seats cleanly, what must be stoned flat, and which fixing points are mandatory.
Along the coast, corrosion marks on dowel bores and cap screws need closer watching. Inland sites often fight fine dust that settles under clamps and against locating edges. During power interruptions, a restart check should confirm plate position, clamp tension, and cutter clearance before the first part goes back under the spindle.
Operated by Astros Marketing (Pty) Ltd from 2 Makro Place, Sunnyrock 1401.
What to record on the plate sheet
Brief Fixture Plate with site photos, application details, holding issues and what is already slipping or wearing. Keep the subject line plain.
Capture the machine model, plate reference, fixing method, and any offset used from the machine zero. Add notes for stopper height, bush type, and worn positions that need monitoring on future runs. When purchasing or maintenance asks how the setup was held, the record should answer that without a second inspection.
What our Cutting Technology customers say
Verified Google reviews