Specs

Software Nest specs

Setup notes and briefing numbers for Software Nest.

Nesting rules that survive production

Software Nest specs cover file input, nesting rules, cut sequencing, remnant handling and machine output requirements. Nesting needs to match the cutter, the material and the way the shop actually runs jobs.

Software Nest specs start with sheet size, material thickness and the cutter controller the shop is using. Nest rotation limits, grain direction, bridge widths and common-line cutting need to be stated before parts are released. In Gauteng dust, on the coast, and during load-shedding recovery, restart position and scrap clearance matter as much as yield.

Keep a marked first-sheet printout with the job pack and operator notes. That reference should show lead-ins, clamp clearance, offcut zones and remnant labelling so the next shift does not guess. When a nested file is reopened after a stoppage, those notes prevent mixed parts and damaged edges.

Nesting pack and output checks

Capture accepted file types, origin point, tooling assignment and output format for the machine on the cell. It also needs cutting order, tab size, skeleton break-up method and rules for remnants that go back into stock. Clear wording helps stores, programming and the operator read the same instruction.

Link Software Nest specs to the matching Cutters setup and any material handling note before changing nesting strategy. Check post-processor output, tool library names and sheet labels again before release to production. Through our contact form, give the bed size and the nesting software version.

Grain direction locked where material demands
First-sheet check signed before full run

Site conditions that alter nests

Dispatch cut-offs, pallet sizes and export packing can change how nests should be built, even when the CAD geometry stays the same. A shop running mixed materials may need separate remnant rules for aluminium composite, MDF or gasket sheet. Older beds and hold-down systems also affect small-part retention and cut order.

At coastal sites, moisture and airborne grit can change board handling and cleaning frequency around the cutter. Inland dust often shows up first in sensors, rails and vacuum performance, which then affects part movement during the run. After power interruptions, the restart point and sheet registration must be checked before another nested program is sent.

Operated by Astros Marketing (Pty) Ltd from 2 Makro Place, Sunnyrock 1401.

Information to brief Software Nest

Send material type, thickness, sheet size, machine model and the output file the controller accepts. Include the smallest part on the job, any grain requirement, and whether remnants must be reused or scrapped. If a previous nest failed, note whether the issue was movement, edge quality, sequencing or labels.

File the Software Nest spec with the job record while tooling, vacuum settings and operator checks are still fresh. That copy should sit with the nested file name, revision mark and machine output reference used on the day. When purchasing or production asks how the run was prepared, the answer is in one place.

What our Cutting Technology customers say

Verified Google reviews