Resources
Media Guide
Media guides that list the air, vacuum, lubrication, and related service requirements around the machine.
How the Media Guide helps during a working week
The Media Guide page lists the services a machine needs around it before installation is signed off. That includes air, vacuum, lubrication, and the related utility checks that affect cutter performance on the floor.
A Media Guide sets out the services the machine must have before handover. It records compressed air quality, vacuum demand, lubrication points, electrical supply, and the utility checks that influence cut quality. Conditions differ between Johannesburg, Durban, and Cape Town, so dust, humidity, and power interruptions need to be written into the installation picture.
Keep photos of the machine position, service drops, and hose routing with the guide. Those images help when a vacuum line is undersized, an air regulator is missing, or lubrication access is blocked after the cell is placed. One page near the machine also helps operators and maintenance staff check the same points after stoppages.
Air, vacuum and lubrication record
The document should name each required service and where it connects on the machine. Include pressure ranges, hose sizes, filtration needs, drain points, and any utility condition that can affect edge finish or sheet hold-down. Clear wording matters when installers, electricians, and production staff are all reading the same sheet.
Use the Media Guide together with machine photos, the installation timing, and notes on any visible cut fault. Confirm the machine identity, service availability, and tooling arrangement before sending it through the contact form. That makes it easier to review whether the issue sits with utilities around the machine or with the cutting setup itself.
- Air supply matched to machine demand
- Vacuum checks logged before sign-off
Site conditions that change utility needs
A machine placed near coastal air may need closer attention on filters, drains, and exposed service hardware. Highveld dust can load extraction points, affect sensors, and shorten cleaning intervals around guides and guarded areas. Older buildings may also limit where air, power, or vacuum lines can be brought in without extra routing.
Power interruptions should be considered when checking restart conditions and service stability. A weak vacuum source or inconsistent air pressure can show up first as poor hold-down, shifted material, or inconsistent edges on the cut. The guide helps you verify surrounding services before those symptoms are blamed on tooling alone.
Operated by Astros Marketing (Pty) Ltd from 2 Makro Place, Sunnyrock 1401.
What to include with your guide
Share the media guide with site photos, timing, and any issue already visible on the cut. Keep the subject line tied to the actual machine or job.
Add the machine model, site location, available utilities, and clear photos of the current installation area. If there is a problem on the cut, note the material, the visible defect, and when it appears during production. Keep the Media Guide with the project record under Resources so the service requirements remain easy to trace later.
What our Cutting Technology customers say
Verified Google reviews